roughly Tilta DJI Transmission Equipment Launched – Handles, Battery Plates and Extra will lid the most recent and most present suggestion roughly the world. manner in slowly therefore you perceive with ease and accurately. will accumulation your information easily and reliably
Tilta has simply launched a brand new line of equipment devoted to the DJI Transmission System with battery plates, assist handles and mounting equipment. The compact V-Mount/Gold Mount Battery Plates for the DJI Excessive-Shiny Distant Monitor and Video Transmitter offers you for much longer run instances in comparison with DJI WB37 and Sony NP-F type batteries. So let’s take a better take a look at this new ecosystem!
DJI Transmission is a stand-alone wi-fi video system launched in June 2022. This wi-fi video system consists of a video transmitter and a high-brightness 7-inch monitor with a built-in receiver. The DJI transmission has a variety of 6km/20,000ft with a claimed latency of simply 68ms. When you’re doing the maths at 25 frames per second, the latency is simply round 1.7 frames. Granted, it is not zero-latency like Teradek’s wi-fi video programs, however DJI Transmission can also be extra inexpensive at $2,499/€1,840 for the combo package.
The DJI Drive System is powered by DJI WB37 batteries or Sony NP-F type batteries with the included battery plates. Plus, after all, you possibly can energy each the monitor and the transmitter externally through a DC to P-jack energy cable. Tilta has launched battery plates, assist handles, and mounting equipment for DJI Transmission to make your life simpler. .
Tilta DJI Transmission Transmitter Battery Plates
Let’s begin with the Tilta Battery Plates for the DJI Transmission Transmitter. The plates are made from aluminum and metal and weigh solely 400g. Accessible in V-Mount and Gold Mount variations, the meeting consists of two battery plates that hook up with the entrance and rear of the transmitter.
The Tilta battery plates observe the form of the DJI Transmission transmitter and don’t protrude from the unit.
Tilta DJI Transmission Battery Plates for Transmitter function energy switch. This implies you possibly can join the DJI transmitter to your digicam/rig’s battery plate and put only one battery on the again of the transmitter to energy the whole lot wirelessly.
DJI Excessive Brightness Monitor Battery Plates
Beneath are the V-Mount/Gold mount battery plates for the DJI Excessive-Shiny 7″ monitor. They’re fully made from aluminum and stainless-steel and add 0.93 lbs/420 g to your DJI Excessive-Shiny monitor.
Tilta’s battery plate inserts into the DJI Excessive-Shiny’s battery slot and attaches utilizing 1/4″-20 screws.
You may barely regulate the place of the battery plate horizontally (3.2 cm up or down) and they don’t block the optionally available DJI Distant Monitor Growth Module.
Tilta DJI Transmission Help Handles
Tilta additionally launched assist handles for the DJI Transmission Excessive-Shiny receiver/monitor. The assist handles weigh 169g and you may connect them to the left and proper aspect of the monitor utilizing 1/4″-20 screws. Then your DJI Excessive-Shiny monitor transforms right into a director’s monitor, which is far more comfy to function for lengthy intervals of time.
Additionally, the stand handles may be unfolded 90°, so you possibly can conveniently place the monitor on a desk (or on the ground if you happen to’re not afraid of somebody stepping on it, which I do not advocate).
If you wish to select one thing a bit of extra “modern” to your DJI Excessive-Shiny monitor, you possibly can select the Sort IX Superior Facet Picket Deal with. Additionally, these picket handles are appropriate with the Ronin 4D.
The Sort IX Superior Facet Wooden Deal with comes with fast launch aspect attachments. You can see a launch button on the short launch fittings to regulate the angle of the deal with to your required wants.
Lastly, Tilta launched a Mini Articulating Arm and DJI Transmission Transmitter Mounting Bracket for the Sony FX6.
The mounting bracket for the Sony FX6 is fairly easy: it is a 90° L-shaped piece of metallic with two 1/4″-20 screws. Additionally, the mount has two finding pins on the aspect of the digicam to forestall it from rotating.
The Tilta Mini Articulated Arm is a extra “common” product and never particularly designed for the DJI Transmission system. The arm is made from aluminum and stainless-steel and weighs solely 150g/0.33lb. It has dimensions of three x 3.5 x 3 inches/7.6 x 8.9 x 7.6 cm with a most payload capability of 4.5 kg/9.9 lbs.
This adjustable arm options 1/4″-20 mounting factors with finding pins on each ends. These finding pins will forestall a monitor from twisting and coming free. For instance, this function might be helpful if you happen to use SmallHD displays.
With any such joint arm, the large inexperienced locking knob releases each joints concurrently, so watch out.
Nevertheless, Tilta plans to launch different heads with completely different mounting lugs: chilly shoe, NATO clamp, rosette mount, and many others.
Costs and availability
All merchandise within the Tilta DJI Transmission ecosystem at the moment are obtainable. Energy provide modules for the DJI Video Transmitter are $139 and battery plates for the DJI Excessive-Shiny Distant Monitor are $79 every. The bracket handles retail for $99, whereas the Tiltaing Superior Sort IX Facet Wooden Deal with is $239. Lastly, the Wi-fi Video Mount Bracket for the Sony FX6 is $15 and the Tilta Mini Articulating Arm is $29.
For extra info, go to the Tilta web site right here.
What do you consider the Tilta DJI Transmission accent ecosystem? Have you ever already obtained or tried the DJI transmission? Be happy to tell us within the feedback beneath!
I hope the article practically Tilta DJI Transmission Equipment Launched – Handles, Battery Plates and Extra provides notion to you and is helpful for including as much as your information
Tilta DJI Transmission Accessories Released – Handles, Battery Plates and More